Tél : +216 71 732 109
Power amplifiers with switching WORK : ZENITH 600

Power amplifiers with switching WORK : ZENITH 600
Power amplifiers with switching WORK : ZENITH 600

Power amplifiers with switching WORK : ZENITH 600

8 ohm stereo output power: 200 W x 2.
4 ohm stereo output power: 300 W x 2.
2 ohm stereo output power: 450 W x 2.
8 ohm bridge output power: 600 W.
4 ohm bridge output power: 850 W.
8 ohm parallel output power: 200 W.
Frequency response: 20 Hz – 20 kHz.
THD+N: 100 dB.
Damping factor: >150.
Dynamic range: >80 dB.
Voltage gain: 26 dB/32 dB.
Input impedance: 20 kohm balanced, 10 kohm unbalanced.
Input sensitivity: 2.2 V / 1.05 V 9.06 dBu / 2.64 dBu.
Rear panel connectors: 2 x ¼ » Jack -XLR3 (Input), 2 x XLN4 (output) / 1 x IEC (supply).
Protections: Overheat, VHF, Short circuit, AC lower, DC Protection, CLIP/Limit.
Main supply: AC 180-260 V, 60/50 Hz.
Dimensions (WxHxD): 483 x 88 x 305 mm.
Weight: 6 kg.

Power amplifiers with switching WORK : ZENITH 600

Power amplifiers with switching mode power supply

 

8 ohm stereo output power: 200 W x 2.
4 ohm stereo output power: 300 W x 2.
2 ohm stereo output power: 450 W x 2.
8 ohm bridge output power: 600 W.
4 ohm bridge output power: 850 W.
8 ohm parallel output power: 200 W.
Frequency response: 20 Hz – 20 kHz.
THD+N: 100 dB.
Damping factor: >150.
Dynamic range: >80 dB.
Voltage gain: 26 dB/32 dB.
Input impedance: 20 kohm balanced, 10 kohm unbalanced.
Input sensitivity: 2.2 V / 1.05 V 9.06 dBu / 2.64 dBu.
Rear panel connectors: 2 x ¼ » Jack -XLR3 (Input), 2 x XLN4 (output) / 1 x IEC (supply).
Protections: Overheat, VHF, Short circuit, AC lower, DC Protection, CLIP/Limit.
Main supply: AC 180-260 V, 60/50 Hz.
Dimensions (WxHxD): 483 x 88 x 305 mm.
Weight: 6 kg.

Avis

Il n’y pas encore d’avis.

Soyez le premier à laisser votre avis sur “Power amplifiers with switching WORK : ZENITH 600”

Votre adresse de messagerie ne sera pas publiée. Les champs obligatoires sont indiqués avec *